The Cisco Catalyst 2955 Series is an industrial-grade switch that provides Fast Ethernet and Gigabit Ethernet connectivity for deployment in harsh environments.
SNMP monitoring is widely used by IPHost clients and makes your network monitoring tasks simple.With the IPHost SNMP tool, you can monitor any SNMP objects of theCatalyst 2955.You can select a variable to monitor using the built-in MIB browser that provides youwith all variables supported by theCatalyst 2955, their current values and descriptions taken from MIBs.
List of Mibs
for SNMP management and monitoring ofCatalyst 2955
This MIB module defines a set of managed objects that instrument devices that conform to the IEEE 802.1 standards for MAC-layer bridges.
MIB module for Catalyst 2900 enterprise-specific information.
MIB module for creating and deleting bulk files of SNMP data for file transfer.
MIB module for management of the Cisco Discovery Protocol in Cisco devices.
MIB module for the management of a group of devices called a ‘cluster’.
“This MIB facilitates writing of configuration filesof an SNMP Agent running Cisco’s IOS in the following ways:to and from the net, copying running configurations to startupconfigurations and vice-versa, and copying a configuration(running or startup) to and from the local IOS file system.”
The MIB represents a model of configuration data that exists in various locations
This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the system, including chassis, slots, modules, ports, power supplies, and fans.
MIB module to describe the status of the Environmental Monitor on those devices that support one.
Flash operations MIB module.
MIB module for invoking Internet File Transfer Protocol (FTP) operations for network management purposes.
IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Multicast groups identified in this MIB and only allow certain ports to join certain multicast groups.
Router image MIB which identifies the capabilities and characteristics of the image.
This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring devices when there are MAC addresses learnt or removed from the forwarding database of the monitored devices.
MIB module for monitoring memory pools.
MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features allow two or more physical interfaces to be aggregated together to form a single agport.
This MIB module contains a modified description of the ciscoPingAddress object.
This MIB module provides complete SNMP management of port security. This MIB includes additional functionality over the 12.1(13)EA1 release with support for configuring secure MAC addresses and receiving SNMP trap notifications
MIB module to describe active system processes.
This MIB module defines the object identifiers that are assigned to various hardware platforms, and hence are returned as values for sysObjectID.
This module defines a MIB for Round Trip Time (RTT) monitoring of a list of targets, using a variety of protocols.
The Structure of Management Information for the Cisco enterprise.
MIB module for Cisco Systems’ StackMaker.
MIB module for managing Cisco extensions to the 802.1D Spanning Tree Protocol (STP).
MIB module to describe and store the system messages generated by the IOS.
This MIB module defines textual conventions used throughout Cisco enterprise MIBs.
An extension to the IETF MIB module for managing and monitoring TCP.
“The MIB module for the management of theVLAN Membership within the frame work of CiscoVLAN Architecture, v 2.0 by Keith McCloghrie. The MIBprovides information on VLAN Membership Policy Serversused by a device and VLAN membership assignments ofnon-trunk bridge ports of the device.”
MIB module for entities implementing the VTP protocol and Vlan management.
MIB module for representing multiple logical entities supported by a single SNMP agent.
This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II’s ifTable.
MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757 and RFC 1513 and RMON2 MIB as specified in RFC 2021.
This Management Information Base module contains information regarding polling the chassis information (specifically the chassis serial number) from Cisco routers and switches. tarting with IOS 12.0
This RFC defines the second version of the Management Information Base (MIB-II) for use with network management protocols in TCP/IP-based internets.
This RFC defines a portion of the Management Information Base (MIB) for use with network management protocols in TCP/IP-based internets. In particular, it defines objects for managing ethernet-like objects.
This Management Information Base contains standard information relating to Remote Network Monitoring.
MIB module for RS-232-like hardware devices.
The SNMP Management Architecture MIB.
This is the management information base module for Message Processing and Dispatching.
This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of notifications.
This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of SNMP messages.
The management information definitions for the SNMP User-based Security Model.
This MIB module defines MIB objects for SNMPv2 entities.
This MIB module defines MIB objects for the Structure of Management Information (SMI).
This MIB module defines MIB objects for SNMPv2 Textual Conventions.
The management information definitions for the View-based Access Control Model for SNMP.
MIB module for managing TCP implementations.
MIB module for managing UDP implementations.
You can start Catalyst 2955 monitoring using free 30-day trial version of IPHost Network Monitor right now.Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost’s SNMP monitor can communicate and interact with any SNMP-enabled device.
Free 30-day trial version of IPHost Network Monitor is available. During your trial you can get support by e-mail, please use contact form to send all your inquiries on IPHost Network Monitor features and purchase.
|Windows Interface Screenshot||Web Interface Screenshot|
Download the free trial of IPHost Network Monitor and start to monitor your network and vital applications in a few minutes.
IPHost Network Monitor 5.3 build 14150 of December 25, 2020. File size: 68MB