IPHost Monitor – MIBs for Catalyst 6000 and 7600 routers

Cisco 6000 and 7600 series Internet Routers provide optical WAN and MAN networking with a focus on line-rate delivery of high-touch IP services at the edge of service providers networks.

SNMP monitoring is widely used by IPHost clients and makes your network monitoring tasks simple.With the IPHost SNMP tool, you can monitor any SNMP objects of theCatalyst 6000 and 7600 routers.You can select a variable to monitor using the built-in MIB browser that provides youwith all variables supported by theCatalyst 6000 and 7600 routers, their current values and descriptions taken from MIBs.

List of Mibs
for SNMP management and monitoring ofCatalyst 6000 and 7600 routers

  • ATM-MIB
    An Internet Standard MIB for basic management of ATM interfaces and VCCs in ATM end-systems and ATM switches.
  • BGP4-MIB
    This MIB module defines managed objects used for managing the Border Gateway Protocol Version 4 or lower.
  • BRIDGE-MIB
    This MIB module defines a set of managed objects that instrument devices that conform to the IEEE 802.1 standards for MAC-layer bridges.
  • CISCO-AAL5-MIB
  • CISCO-ADMISSION-POLICY-MIB
  • CISCO-ALPS-MIB
  • CISCO-ATM-EXT-MIB
  • CISCO-ATM-PVC-MIB
  • CISCO-AUTH-FRAMEWORK-MIB
  • CISCO-BCP-MIB
  • CISCO-BGP-POLICY-ACCOUNTING-MIB
  • CISCO-BLUK-FILE-MIB
  • CISCO-BRIDGE-EXT-MIB
  • CISCO-BSTUN-MIB
  • CISCO-CABLE-DIAG-MIB
  • CISCO-CALL-HISTORY-MIB
  • CISCO-CALLHOME-MIB
    The MIB module for the management of the Call Home feature within the framework of Cisco’s Call Home architecture.
  • CISCO-CAR-MIB
    This MIB incorporates objects from the Cisco Rate-limit line interfaces. Its purpose is to provide Weighted Rate-Limit packet filtering information.
  • CISCO-CASA-MIB
  • CISCO-CAT6k-CROSSBAR-MIB
  • CISCO-CDP-MIB
    MIB module for management of the Cisco Discovery Protocol in Cisco devices.
  • CISCO-CEF-MIB
  • CISCO-CLASS-BASED-QOS-MIB
    This MIB provides read access to Quality of Service (QoS) configuration and statistics information for Cisco platforms that support the Modular Quality of Service Command-line Interface (Modular QoS CLI).
  • CISCO-CONFIG-COPY-MIB
    “This MIB facilitates writing of configuration filesof an SNMP Agent running Cisco’s IOS in the following ways:to and from the net, copying running configurations to startupconfigurations and vice-versa, and copying a configuration(running or startup) to and from the local IOS file system.”
  • CISCO-CONFIG-MAN-MIB
    The MIB represents a model of configuration data that exists in various locations
  • CISCO-DATA-COLLECTION-MIB
  • CISCO-DHCP-SNOOPING-MIB
    This MIB module is for configuration of the DHCP Snooping feature.
  • CISCO-DLSW-EXT-MIB
  • CISCO-DLSW-MIB
  • CISCO-DSPU-MIB
  • CISCO-DYNAMIC-ARP-INSPECTION-MIB
  • CISCO-EIGRP-MIB
  • CISCO-ENHANCED-IMAGE-MIB
  • CISCO-ENHANCED-MEMPOOL-MIB
  • CISCO-ENTITY-ALARM-MIB
    This MIB module defines the managed objects that support the monitoring of alarms generated by physical entities contained by the system, including chassis, slots, modules, ports, power supplies, and fans.
  • CISCO-ENTITY-ASSET-MIB
    This MIB module allows you to monitor the asset information of items in the ENTITY-MIB (RFC 2037) entPhysical table.
  • CISCO-ENTITY-DIAG-MIB
  • CISCO-ENTITY-DISPLAY-MIB
  • CISCO-ENTITY-EXT-MIB
    This MIB is an extension of the ENTITY-MIB specified in RFC2737.
  • CISCO-ENTITY-FRU-CONTROL-MIB
    “The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitorand configure operational status ofField Replaceable Units (FRUs) and other managablephysical entities of the system listed in theEntity-MIB (RFC 2737) entPhysicalTable.FRUs include assemblies such as power supplies, fans,processor modules, interface modules, etc.”
  • CISCO-ENTITY-SENSOR-MIB
    The CISCO-ENTITY-SENSOR-MIB is used to monitor the values of sensors in the Entity-MIB (RFC 2037) entPhysicalTable.
  • CISCO-ENTITY-VENDORTYPE-OID-MIB
    This module defines the object identifiers that are assigned to various components on Cisco products, which are used by the entPhysicalTable of the ENTITY-MIB to uniquely identify the type of each physical entry.
  • CISCO-ENVMON-MIB
    MIB module to describe the status of the Environmental Monitor on those devices that support one.
  • CISCO-ERR-DISABLE-MIB
  • CISCO-ETHERLIKE-EXT-MIB
  • CISCO-FLASH-MIB
    Flash operations MIB module.
  • CISCO-FLEX-LINKS-MIB
  • CISCO-FRAME-RELAY-MIB
  • CISCO-FTP-CLIENT-MIB
    MIB module for invoking Internet File Transfer Protocol (FTP) operations for network management purposes.
  • CISCO-HSRP-EXT-MIB
    This MIB provides an extension to the CISCO-HSRP-MIB which defines Cisco’s “proprietary Hot Standby Routing Protocol (HSRP), defined in RFC2281.
  • CISCO-HSRP-MIB
    This MIB provides a means to monitor and configure the Cisco IOS proprietary Hot Standby Router Protocol (HSRP). Cisco HSRP protocol is defined in RFC2281 (informational rfc).
  • CISCO-HW-MODULE-CONTROL-MIB
  • CISCO-IETF-ATM2-PVCTRAP-MIB
  • CISCO-IETF-IP-FORWARD-MIB
  • CISCO-IETF-IP-MIB
  • CISCO-IF-EXTENSION-MIB
    A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not available in other MIBS.
  • CISCO-IGMP-SNOOPING-MIB
  • CISCO-IMAGE-MIB
    Router image MIB which identifies the capabilities and characteristics of the image.
  • CISCO-INTERFACETOPN-EXT-MIB
  • CISCO-IPMROUTE-MIB
    MIB module for management of IP Multicast routing, but independent of the specific multicast routing protocol in use.
  • CISCO-IP-STAT-MIB
    This MIB incorporates objects to provide support for the Cisco IP statistics as implemented in command interfaces.
  • CISCO-IP-TAP-MIB
  • CISCO-IP-URPF-MIB
  • CISCO-L2-CONTROL-MIB
  • CISCO-L2L3-INTERFACE-CONFIG-MIB
    This MIB is used to monitor and control configuration of interface switchport and routed mode.
  • CISCO-L2-TUNNEL-CONFIG-MIB
  • CISCO-LAG-MIB
    This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB) or specific to Cisco products.
  • CISCO-MAC-AUTH-BYPASS-MIB
  • CISCO-MAC-NOTIFICATION-MIB
    This MIB module is for configuration of the MAC notification feature. MAC notification is a mechanism to inform monitoring devices when there are MAC addresses learnt or removed from the forwarding database of the monitored devices.
  • CISCO-MAU-EXT-MIB
  • CISCO-MEMORY-POOL-MIB
    MIB module for monitoring memory pools.
  • CISCO-MODULE-AUTO-SHUTDOWN-MIB
  • CISCO-NDE-MIB
  • CISCO-NETFLOW-MIB
  • CISCO-NETINT-MIB
  • CISCO-NTP-MIB
    This MIB module defines a MIB which provides mechanisms to monitor an NTP server.
  • CISCO-PACKET-CAPTURE-MIB
  • CISCO-PAE-MIB
    This MIB provides Port Access Entity information that is either excluded by IEEE Std 802.1x (IEEE8021-PAE-MIB) or specific to Cisco products.
  • CISCO-PAGP-MIB
    MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features allow two or more physical interfaces to be aggregated together to form a single agport.
  • CISCO-PIM-MIB
    This MIB module defines the cisco specific variables for Protocol Independent Multicast (PIM) management. These definitions are an extension of those defined in the IETF PIM MIB (RFC 2934).
  • CISCO-PING-MIB
    This MIB module contains a modified description of the ciscoPingAddress object.
  • CISCO-PORT-SECURITY-MIB
    This MIB module provides complete SNMP management of port security. This MIB includes additional functionality over the 12.1(13)EA1 release with support for configuring secure MAC addresses and receiving SNMP trap notifications
  • CISCO-PORT-STORM-CONTROL-MIB
    The MIB module for managing Cisco Port Storm Control.
  • CISCO-POWER-ETHERNET-EXT-MIB
  • CISCO-PRIVATE-VLAN-MIB
    MIB module to support Private VLAN feature on Cisco’s switching devices.
  • CISCO-PROCESS-MIB
    MIB module to describe active system processes.
  • CISCO-PRODUCTS-MIB
    This MIB module defines the object identifiers that are assigned to various hardware platforms, and hence are returned as values for sysObjectID.
  • CISCO-QOS-POLICY-CONFIG-MIB
    This MIB module defines managed objects that support the policy source configuration of Quality of Service (QoS) on the device.
  • CISCO-QUEUE-MIB
    This is the MIB module for objects used to manage interface queuing in Cisco devices.
  • CISCO-RF-MIB
    This MIB provides configuration control and status for the Redundancy Framework (RF) subsystem.
  • CISCO-RMON-CONFIG-MIB
    This module defines configuration extensions for some of the IETF RMON MIBs.
  • CISCO-RSRB-MIB
  • CISCO-RTTMON-MIB
    This module defines a MIB for Round Trip Time (RTT) monitoring of a list of targets, using a variety of protocols.
  • CISCO-SLB-EXT-MIB
  • CISCO-SLB-MIB
  • CISCO-SNAPSHOT-MIB
    This MIB module contains information regarding Snapshot routing.
  • CISCO-SONET-MIB
  • CISCO-SRP-MIB
  • CISCO-STACK-MIB
    Main SNMP MIB for the Catalyst OS products such as Catalyst 1000, Catalyst 1200, Catalyst 4000, Catalyst 5000, and Catalyst 6000. This MIB provides configuration and runtime status for chassis, modules, ports, etc. on the Catalyst systems.
  • CISCO-STP-EXTENSIONS-MIB
    MIB module for managing Cisco extensions to the 802.1D Spanning Tree Protocol (STP).
  • CISCO-STUN-MIB
  • CISCO-SVI-AUTOSTATE-MIB
  • CISCO-SWITCH-ENGINE-MIB
  • CISCO-SWITCH-HARDWARE-CAPACITY-MIB
  • CISCO-SWITCH-MULTICAST-MIB
  • CISCO-SWITCH-NETFLOW-MIB
  • CISCO-SWITCH-QOS-MIB
  • CISCO-SWITCH-STATS-MIB
  • CISCO-SYSLOG-MIB
    MIB module to describe and store the system messages generated by the IOS.
  • CISCO-TAP2-MIB
  • CISCO-TCP-MIB
    An extension to the IETF MIB module for managing TCP implementations.
  • CISCO-TRUSTSEC-INTERFACE-MIB
  • CISCO-TRUSTSEC-MIB
  • CISCO-TRUSTSEC-POLICY-MIB
  • CISCO-TRUSTSEC-SERVER-MIB
  • CISCO-TRUSTSEC-SXP-MIB
  • CISCO-UDLDP-MIB
    This MIB module contains information on the Uni Direction Link Detection Protocol.
  • CISCO-VINES-MIB
  • CISCO-VIRTUAL-SWITCH-MIB
  • CISCO-VLAN-GROUP-MIB
  • CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB
    Cisco VLAN ifTable Relationship MIB lists VLAN-id and ifIndex information for routed VLAN interfaces.
  • CISCO-VLAN-MEMBERSHIP-MIB
    “The MIB module for the management of theVLAN Membership within the frame work of CiscoVLAN Architecture, v 2.0 by Keith McCloghrie. The MIBprovides information on VLAN Membership Policy Serversused by a device and VLAN membership assignments ofnon-trunk bridge ports of the device.”
  • CISCO-VLAN-TRANSLATION-MIB
  • CISCO-VPDN-MGMT-MIB
    This MIB is to support the VPDN (Virtual Private Dialup Network) feature of Cisco IOS. VPDN handles the forwarding of PPP links from an Internet Provider (ISP) to a Home Gateway.
  • CISCO-VTP-MIB
    MIB module for entities implementing the VTP protocol and Vlan management.
  • DISMAN-EXPRESSION-MIB
  • DLSW-MIB
  • DS3-MIB
  • ENTITY-MIB
    MIB module for representing multiple logical entities supported by a single SNMP agent.
  • ETHERLIKE-MIB
    MIB module to describe generic objects fo Ethernet-like network interfaces.
  • EXPRESSION-MIB
    MIB module for defining expressions of MIB objects for network management purposes.
  • FRAME-RELAY-DTE-MIB
  • HC-ALARM-MIB
    This module defines Remote Monitoring MIB extensions for High Capacity Alarms.
  • HC-RMON-MIB
    MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757 and RFC 1513 and RMON2 MIB as specified in RFC 2021.
  • IEEE8021-PAE-MIB
    Port Access Entity module for managing IEEE 802.1X.
  • IEEE8023-LAG-MIB
    Link Aggregation module for managing IEEE Std 802.3ad.
  • IF-MIB
    MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757 and RFC 1513 and RMON2 MIB as specified in RFC 2021.
  • IGMP-MIB
    MIB module for Internet Group Management Protocol (IGMP).
  • INTERFACETOPN-MIB
  • INT-SERV-GUARANTEED-MIB
    MIB module to describe the Guaranteed Service of the Integrated Services Protocol
  • INT-SERV-MIB
    MIB module to describe the Integrated Services Protocol
  • IPMROUTE-MIB
    MIB module for management of IP Multicast routing, but independent of the specific multicast routing protocol in use.
  • IP-TUNNEL-MIB
  • ISDN-MIB
  • MAU-MIB
  • MPLS-LDP-MIB
  • MPLS-LSR-MIB
  • MPLS-TE-MIB
  • MPLS-VPN-MIB
  • NOTIFICATION-LOG-MIB
    MIB module for logging SNMP Notifications, that is, Traps and Informs.
  • NOVELL-IPX-MIB
  • NOVELL-NLSP-MIB
  • NOVELL-RIPSAP-MIB
  • OLD-CISCO-APPLETALK-MIB
  • OLD-CISCO-CHASSIS-MIB
    This Management Information Base module contains information regarding polling the chassis information (specifically the chassis serial number) from Cisco routers and switches. tarting with IOS 12.0
  • OLD-CISCO-CPU-MIB
  • OLD-CISCO-DECNET-MIB
  • OLD-CISCO-FLASH-MIB
  • OLD-CISCO-INTERFACES-MIB
  • OLD-CISCO-IP-MIB
  • OLD-CISCO-MEMORY-MIB
  • OLD-CISCO-NOVELL-MIB
  • OLD-CISCO-SYS-MIB
  • OLD-CISCO-TCP-MIB
  • OLD-CISCO-TS-MIB
  • OLD-CISCO-VINES-MIB
  • OLD-CISCO-XNS-MIB
  • OSPF-MIB
    MIB module to describe the OSPF Version 2 Protocol
  • PIM-MIB
    MIB module for management of PIM routers.
  • POWER-ETHERNET-MIB
  • Q-BRIDGE-MIB
    The VLAN Bridge MIB module for managing Virtual Bridged Local Area Networks, as defined by IEEE 802.1Q-1998.
  • RFC1213-MIB
    This RFC defines the second version of the Management Information Base (MIB-II) for use with network management protocols in TCP/IP-based internets.
  • RFC1243-MIB
  • RFC2006-MIB
  • RMON2-MIB
    MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757.
  • RMON-MIB
    This Management Information Base contains standard information relating to Remote Network Monitoring.
  • RS-232-MIB
    MIB module for RS-232-like hardware devices.
  • RSVP-MIB
    The Resource Reservation Protocol (RSVP) Management Information Base (MIB) feature introduces three new MIBs. The MIBs allow users to use SNMP to access objects belonging to RSVP, Integrated Services, and Guaranteed Services.
  • SMON-MIB
    MIB module for managing remote monitoring device implementations for Switched Networks.
  • SNA-SDLC-MIB
  • SNMP-COMMUNITY-MIB
    This MIB module defines objects to help support coexistence between SNMPv1, SNMPv2c, and SNMPv3.
  • SNMP-FRAMEWORK-MIB
    The SNMP Management Architecture MIB.
  • SNMP-MPD-MIB
    This is the management information base module for Message Processing and Dispatching.
  • SNMP-NOTIFICATION-MIB
    This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of notifications.
  • SNMP-TARGET-MIB
    This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of SNMP messages.
  • SNMP-USM-MIB
    The management information definitions for the SNMP User-based Security Model.
  • SNMPv2-MIB
    This MIB module defines MIB objects for SNMPv2 entities.
  • SNMP-VACM-MIB
    The management information definitions for the View-based Access Control Model for SNMP.
  • SONET-MIB
  • TCP-MIB
    MIB module for managing TCP implementations.

You can start Catalyst 6000 and 7600 routers monitoring using free 30-day trial version of IPHost Network Monitor right now.Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost’s SNMP monitor can communicate and interact with any SNMP-enabled device.

Free 30-day trial version of IPHost Network Monitor is available. During your trial you can get support by e-mail, please use contact form to send all your inquiries on IPHost Network Monitor features and purchase.

Windows Interface Screenshot Web Interface Screenshot
Windows Interface Screenshot Web Interface Screenshot
 

Download the free trial of IPHost Network Monitor and start to monitor your network and vital applications in a few minutes.



IPHost Network Monitor 5.3 build 14150 of December 25, 2020. File size: 68MB


Comments are closed.