IPHost Monitor – MIBs for Cisco Nexus 3000

Ultra-Low Latency, High-Density Layer 2/3 Switches

SNMP monitoring is widely used by IPHost clients and makes your network monitoring tasks simple.With the IPHost SNMP tool, you can monitor any SNMP objects of theCisco Nexus 3000.You can select a variable to monitor using the built-in MIB browser that provides youwith all variables supported by theCisco Nexus 3000, their current values and descriptions taken from MIBs.

List of Mibs
for SNMP management and monitoring ofCisco Nexus 3000

    This MIB module defines a set of managed objects that instrument devices that conform to the IEEE 802.1 standards for MAC-layer bridges.
    This MIB is an extension to the CISCO-AAA-SERVER-MIB. This MIB module enhances the ‘casConfigTable’ to include other types of Server addresses.
    MIB module for monitoring communications and status of AAA Server operation.
    The MIB module for the management of the Call Home feature within the framework of Cisco’s Call Home architecture.
    MIB module for management of the Cisco Discovery Protocol in Cisco devices.
    This MIB applies to one or more of a set of devices which have connectivity through some kind of ‘fabric’.
    “MIB module for integrating different elements ofmanaging a device. For example, different device accessmethods like SNMP, CLI, XML and so on have different setof users which are used to communicate with the device.The ccmCommonUserTable provides framework to create oneset of users which is common across all the deviceaccess methods.”
    “A MIB Module for managing the roles that are commonbetween access methods like Command Line Interface (CLI),SNMP and XML interface. This MIB is an extension to theCISCO-COMMON-ROLES-MIB, which is for managing CommonRoles on a device with fixed feature.”
    MIB module for managing the common roles between access methods like Command Line Interface (CLI), SNMP and XML interfaces.
    “This MIB facilitates writing of configuration filesof an SNMP Agent running Cisco’s IOS in the following ways:to and from the net, copying running configurations to startupconfigurations and vice-versa, and copying a configuration(running or startup) to and from the local IOS file system.”
    This MIB is an extension of the ENTITY-MIB specified in RFC2737.
    “The CISCO-ENTITY-FRU-CONTROL-MIB is used to monitorand configure operational status ofField Replaceable Units (FRUs) and other managablephysical entities of the system listed in theEntity-MIB (RFC 2737) entPhysicalTable.FRUs include assemblies such as power supplies, fans,processor modules, interface modules, etc.
    The CISCO-ENTITY-SENSOR-MIB is used to monitor the values of sensors in the Entity-MIB (RFC 2037) entPhysicalTable.
    This module defines the object identifiers that are assigned to various components on Cisco products, which are used by the entPhysicalTable of the ENTITY-MIB to uniquely identify the type of each physical entry.
    This MIB module is to facilitate the global level control (enabling/disabling) over the optional features in the system.
    Flash operations MIB module.
    This module defines Remote Monitoring MIB extensions for High Capacity Alarms.
    This MIB provides a means to monitor and configure the Cisco IOS proprietary Hot Standby Router Protocol (HSRP). Cisco HSRP protocol is defined in RFC2281 (informational rfc).
    A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not available in other MIBS.
    This MIB provides objects to upgrade images on modules in the system, objects showing the status of the upgrade operation, and objects showing the type of images that could be run in the system.
    The MIB module for a method of managing license files on the system.
    This MIB module defines a MIB which provides mechanisms to monitor an NTP server.
    MIB module to describe active system processes.
    This module defines configuration extensions for some of the IETF RMON MIBs.
    MIB module for displaying and configuring accounting and Secure Shell (SSH) related features in a device.
    MIB module for configuring and monitoring System Log related management parameters as defined by RFC 3164.
    MIB module for monitoring High Availability, SNMP SET errors and bandwidths.
    MIB module to describe and store the system messages generated by the IOS.
    This MIB module contains information on the Uni Direction Link Detection Protocol.
    “The MIB module for the management of theVLAN Membership within the frame work of CiscoVLAN Architecture, v 2.0 by Keith McCloghrie. The MIBprovides information on VLAN Membership Policy Serversused by a device and VLAN membership assignments ofnon-trunk bridge ports of the device.”
    MIB module for entities implementing the VTP protocol and Vlan management.
    MIB module for representing multiple logical entities supported by a single SNMP agent.
    This module defines Remote Monitoring MIB extensions for High Capacity Alarms.
  • IF-MIB
    MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757 and RFC 1513 and RMON2 MIB as specified in RFC 2021.
  • IP-MIB
    MIB module for managing IP and ICMP implementations, but excluding their management of IP routes.
    MIB module to describe the OSPF Version 2 Protocol
    This Management Information Base contains standard information relating to Remote Network Monitoring.
  • SNMPv2-MIB
    This MIB module defines MIB objects for SNMPv2 entities.
    MIB module for managing TCP implementations.
    MIB module for managing UDP implementations.

You can startCisco Nexus 3000monitoring using free 30-day trial version of IPHost Network Monitor right now.Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost’s SNMP monitor can communicate and interact with any SNMP-enabled device.

Free 30-day trial version of IPHost Network Monitor is available. During your trial you can get support by e-mail, please use contact form to send all your inquiries on IPHost Network Monitor features and purchase.

Windows Interface Screenshot Web Interface Screenshot
Windows Interface Screenshot Web Interface Screenshot

Download the free trial of IPHost Network Monitor and start to monitor your network and vital applications in a few minutes.

IPHost Network Monitor 5.3 build 14150 of December 25, 2020. File size: 68MB

Comments are closed.