Provide efficient and cost-effective network connectivity for branch offices or small and medium-sized businesses.
SNMP monitoring is widely used by IPHost clients and makes your network monitoring tasks simple.With the IPHost SNMP tool, you can monitor any SNMP objects of theEthernet Catalyst 2960.You can select a variable to monitor using the built-in MIB browser that provides youwith all variables supported by theEthernet Catalyst 2960, their current values and descriptions taken from MIBs.
List of Mibs
for SNMP management and monitoring ofEthernet Catalyst 2960
This MIB module defines a set of managed objects that instrument devices that conform to the IEEE 802.1 standards for MAC-layer bridges.
MIB module for creating and deleting bulk files of SNMP data for file transfer.
MIB module for management of the Cisco Discovery Protocol in Cisco devices.
MIB module for the management of a group of devices called a ‘cluster’.
“This MIB facilitates writing of configuration filesof an SNMP Agent running Cisco’s IOS in the following ways:to and from the net, copying running configurations to startupconfigurations and vice-versa, and copying a configuration(running or startup) to and from the local IOS file system.”
The MIB represents a model of configuration data that exists in various locations
This MIB module is for configuration of the DHCP Snooping feature.
The CISCO-ENTITY-SENSOR-MIB is used to monitor the values of sensors in the Entity-MIB (RFC 2037) entPhysicalTable.
This module defines the object identifiers that are assigned to various components on Cisco products, which are used by the entPhysicalTable of the ENTITY-MIB to uniquely identify the type of each physical entry.
MIB module to describe the status of the Environmental Monitor on those devices that support one.
Flash operations MIB module.
MIB module for invoking Internet File Transfer Protocol (FTP) operations for network management purposes.
A MIB module for extending the IF-MIB (RFC2863) to add objects which provide additional information about interfaces not available in other MIBS.
IGMP Filter configuration MIB. This MIB provides a mechanism for users to configure the system to intercept IGMP joins for IP Multicast groups identified in this MIB and only allow certain ports to join certain multicast groups.
Router image MIB which identifies the capabilities and characteristics of the image.
This MIB provides Link Aggregation information that are either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB) or specific to Cisco products.
MIB module for monitoring memory pools.
MIB module for configuration of Fast Etherchannel and the operation of the Port Aggregation Protocol (PAgP). These features allow two or more physical interfaces to be aggregated together to form a single agport.
This MIB module contains a modified description of the ciscoPingAddress object.
This MIB module is for the management of Cisco’s per port rate-limiting and traffic shaping on L3 switch/Router Platform(s).
This MIB module provides complete SNMP management of port security. This MIB includes additional functionality over the 12.1(13)EA1 release with support for configuring secure MAC addresses and receiving SNMP trap notifications
The MIB module for managing Cisco Port Storm Control.
MIB module to support Private VLAN feature on Cisco’s switching devices.
MIB module to describe active system processes.
This MIB module defines the object identifiers that are assigned to various hardware platforms, and hence are returned as values for sysObjectID.
This module defines a MIB for Round Trip Time (RTT) monitoring of a list of targets, using a variety of protocols.
MIB module for Cisco Systems’ StackMaker.
Main SNMP MIB for the Catalyst OS products such as Catalyst 1000, Catalyst 1200, Catalyst 4000, Catalyst 5000, and Catalyst 6000. This MIB provides configuration and runtime status for chassis, modules, ports, etc. on the Catalyst systems.
MIB module for managing Cisco extensions to the 802.1D Spanning Tree Protocol (STP).
MIB module to describe and store the system messages generated by the IOS.
An extension to the IETF MIB module for managing TCP implementations.
This MIB module contains information on the Uni Direction Link Detection Protocol.
Cisco VLAN ifTable Relationship MIB lists VLAN-id and ifIndex information for routed VLAN interfaces.
“The MIB module for the management of theVLAN Membership within the frame work of CiscoVLAN Architecture, v 2.0 by Keith McCloghrie. The MIBprovides information on VLAN Membership Policy Serversused by a device and VLAN membership assignments ofnon-trunk bridge ports of the device.”
MIB module for entities implementing the VTP protocol and Vlan management.
MIB module for representing multiple logical entities supported by a single SNMP agent.
MIB module to describe generic objects fo Ethernet-like network interfaces.
Port Access Entity module for managing IEEE 802.1X.
Link Aggregation module for managing IEEE Std 802.3ad.
MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757 and RFC 1513 and RMON2 MIB as specified in RFC 2021.
This Management Information Base module contains information regarding polling the chassis information (specifically the chassis serial number) from Cisco routers and switches. tarting with IOS 12.0
MIB module for managing remote monitoring device implementations. This MIB module augments the original RMON MIB as specified in RFC 1757.
This Management Information Base contains standard information relating to Remote Network Monitoring.
The SNMP Management Architecture MIB.
This is the management information base module for Message Processing and Dispatching.
This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of notifications.
This MIB module defines MIB objects which provide mechanisms to remotely configure the parameters used by an SNMP entity for the generation of SNMP messages.
The management information definitions for the SNMP User-based Security Model.
This MIB module defines MIB objects for SNMPv2 entities.
The management information definitions for the View-based Access Control Model for SNMP.
MIB module for managing TCP implementations.
MIB module for managing UDP implementations.
You can startEthernet Catalyst 2960monitoring using free 30-day trial version of IPHost Network Monitor right now.Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost’s SNMP monitor can communicate and interact with any SNMP-enabled device.
Free 30-day trial version of IPHost Network Monitor is available. During your trial you can get support by e-mail, please use contact form to send all your inquiries on IPHost Network Monitor features and purchase.
|Windows Interface Screenshot||Web Interface Screenshot|
Download the free trial of IPHost Network Monitor and start to monitor your network and vital applications in a few minutes.
IPHost Network Monitor 5.3 build 14150 of December 25, 2020. File size: 68MB